It is suitable for bias and all-steel semi-steel bladder cure release of bias and radial tyre and spray 1-2 times during 8-12hours.
Bladder Coating Agent SBC-956 is a semi-permanent tire coating agent. The active ingredient is a reactive silicone polymer. The product provides an excellent slippage of the bladder into the green tire and a very good release effect the cure. After the cure the inside of the tire is clean, smooth and dry. The inner liner splice is not effected because the active ingredient does not show the negative seperation effects normally observed with regular silicone oil. Low consumption and a short drying time make the product very economical. Bladder Coating Agent SBC-956 does not give any stains or marks if accidently applied on the tire outside.
Semi-permanent bladder coating agent for passenger car tire, off-the-road tire and rubber product.
At first, the bladder has to be cleaned to be sure there are no residues left that might impair the coating ,Bladder coating agent SBC-956 is then applied by wiping it directly on the new bladder in an undiluted form, Afterwards you should give enough time for the coating to dry and to bond on the surface of the bladder. At the time of cure, bladder coating agent SCB-956 can be sprayed on the surface of the bladder suing atomizing or airless spray systems.The suspension has virtually no tendency towards semimentation. However, we recommend to stir the product during processing.
Compostion: aqueous emulsion of reactive silicone polymers
Appearence: white medium-viscosity liquid
Active substance content: 20%(4h/105℃)
20kg plastic drum 50kgs plastic drum
Safety and Transport
Bladder Coating Agent SBC-956 not classified as a dangerous good according to transprot legislation. so wu should transport it in term of undangerous good. There is a smell of acetic acid, so it has antiseptic
effect, It has not any hurt if you use it in right way.
Bladder Coating Agent SBC-956 has to be protected from frost, heat and direct sunlight, If these rules
ar obeyed, the product can be stored for six months, The production date is stated on the lot number on the label of each container.
Product's technical information and data are based on the best information available and does not constitute or imply a warranty or patent infringement o any kind. The user is responsible for testing product suitability before to use the production.
If the semi-permanent bladder coating agent for all steel semi steel is the one you are looking for, welcome to buy the best products with our professional manufacturers and suppliers in China. We are equipped with a productive factory at your service. And our company will offer you good service and fast delivery.