Tire Rubber Tube Release Agent

Tire Tube Release Agent SIP-30LT2 is composed of complex fatty acid salts, high molecular weight polymer, and fine amorphous filler, which is mainly used in an tube extrusion process to prevent the sticking of uncured rubber tubes. SIP-30LT2 can prevent dust problems during process (e.g. Talc powder) and does not form any hard build-up / deposits onto the surface of rubber tubes and equipment.

Product Details

SIP-30LT2

Description:

 

Tire Tube Release Agent SIP-30LT2 is composed of complex fatty acid salts, high molecular weight polymer, and fine amorphous filler, which is mainly used in an tube extrusion process to prevent the sticking of uncured rubber tubes. SIP-30LT2 can prevent dust problems during process (e.g. Talc powder) and does not form any hard build-up / deposits onto the surface of rubber tubes and equipment. SIP-30LT2 could form an uniform film onto the outside surface of tire tubes to prevent the sticking. During curing process at high temperature, this anti-tacking film can melt into rubber compound, which means that it does not cause any problems during subsequent processing.

 

Application fields:

 

All kinds of Butyl, NR tire tubes, uncured rubber semi-finished products. Rubber compound mixing process.

 

Application:

 

It is recommended to dilute SIP-30LT2 with water for application. The dilution ratio may be advisable around 1:5

 

It is necessary to stir the liquid product gently before use, in order to achieve a homogeneous dispersion.

 

When diluting with water, it may be advisable to start off with the concentrate and then gradually add the required amount of water.

 

SIP-30LT is mainly used in tire tube extrusion process and spray cooling process.

 

Technical Data:

 

Composition: Combination of complex fatty acid salts, high molecular weight polymer, and fine amorphous filler.

 

Appearance: offwhite, medium viscous dispersion.

 

Drying content:26 ~ 32%

 

 

PH (1:10): 7- 10

 

Solubility: disperses in water.

 

Packing:

 

25kg cardboard box with PE-inlet.   50kg, 120kg, 200kg, plastic drums.

 

Safety and transport

 

SIP-30LT2 is not classified as a dangerous good according to transport legislation, so we should transport it in term of undangerous good. It has not any hurt in right processing way.


Storage

 

SIP-30LT2 should be stored in cool and dry place. In original closed containers under cool and dry conditions 12 months at least. Do not allow to freeze.

 

Further information:

 

Product technical information and data is based on the best information available and does not constitute or imply a warranty or patent infringement of any kind. The user is responsible for testing product suitability prior to using into production.

 



Inquiry