Description TM-80CT2 is water based semi-permanent release agent which contains special active polysiloxane. It can form a thin, uniform coating film on the surface of the mould, which can reduce the adhesion between the rubber and the mould, and improve the quality of product appearance; it also can reduce the cleaning frequency of the mould.
Application fields
TM-80CT2 can be used in the production process of all kinds of rubber except Silicone rubber.
Application
In the first time, the mould should be clean before using TM-80CT2, and then spray TM-80CT2 two or three times onto the hot mould carefully. After that, a short drying / curing time is good, longer drying time and higher curing temperature will get an durable release film and effective performance with more demoulding times. Rubber vulcanization can be performed if the pretreatment above were completed. The latter vulcanization process just need spray TM-80CT2 one time for one interval and dry for a short time.
Technical Data
Composition: special polysiloxane emulsion;
Appearance: white emulsion;
pH:4~7;
Packing:
25kg plastic drum, 50kg plastic drum.
Safety:
The product has not any hurt if you use it in right way. Consult material safety data sheet (MSDS) for additional handling information on TM-80CT2.
Storage and Transport:
TM-80CT2 is not classified as a dangerous good according to transport legislation, so it can be transported in terms of non-dangerous goods. TM-80CT2 should be stored in cool and dry place with closed container, protected from frost, heat and direct sunlight. The product has a shelf life of 3 months at least.
Further information
Product technical information and data is based on the best information available and does not constitute or imply a warranty or patent infringement of any kind. The user is responsible for testing product suitability before to use the production.