The water based tire finishing paint TPA-933 is designed for tire manufacturers to improve the appearance of vulcanized tyres.TPA-933 ensures the tyre has an excellent appearance which accord with the customer;s requirement. It has strong adhesion with the tyre and can effectively eliminate the color change of the tyre after long-term storage.After fully drying, an elastic film on the surface of the tyre is formed, which would effectively avoid the cracking and peeling even during flexing or stretching,After modified with the procuct,the tyre has a matte finish, uniform color and does not stick to any dust.
Improve appearance of the finished vulcanized tyre or modify the surface of the repaired tyre.
1 Ideally the outside tire finishing paint TPA-933 is applied with air-atomizing guns or soft brush evenly onto the surface of clean tyre, The product does not have a tendency to sedimentation, but slow stirring is advantageous prior to use.
2 Pour TPA-933 into the spraying equipement, and spray it evently onto the surace of the standing tyre, the drying time is about 15min under conditions of 20 and 60% relative humidity.
3 In case of overspray or spillage, TPA-933 is easy to be rinsed off before drying, After fully dried, the product is resistance to water and washing
Appearance: Black liquid PH-value:9-11
Viscosity: Low viscosity emulsion Solids content : 20%
7.5 kgs plastic drums
The outside tire finishing paint TPA-933 should be stored in tightly sealed containers and has to be protected from frost, heat and direct sunlight. if these rules are obeyed, the product can be stored for at least one year. The production date is stated on the lot number on the labels of eah container.