Release Agent PRP-75C is a powder batch-off release agent. It prevents the adhesion of uncured rubber and milled sheets during storage. Release Agent PRP-75C consists of inorganic fillers and active substances . Release Agent PRP-75C shows good wetting and release properties for all types of rubber independent of softness and stickiness.
Release Agent PRP-75C is a powder batch-off release agent. It prevents the adhesion of uncured rubber and milled sheets during storage. Release Agent PRP-75C consists of inorganic fillers and active substances . Release Agent PRP-75C shows good wetting and release properties for all types of rubber independent of softness and stickiness. Release Agent PRP-75C is well tolerated by the
rubber and there is no influence to flow behavior or other properties during vulcanization.
Release Agent PRP-75C is as a powder batch-off release agent suited for all kinds of elastomeres.
For Release Agent PRP-75C we recommend a concentration of approx. 2.5%-4.5%, depending on the air temperature of machining workshop, rubber composition and shore hardness of the rubber mixture.High concentration is usual applied for sticking rubber in summer ,whereas low concentration.
Release Agent PRP-75C forms thin,flexible film on the surface of milled sheets.The film has good release properties and prevents the formation of dust,which means that it does not cause any problems during subsequent processing. Release Agent PRP-75C only forms slight,soft-deposits on the equipment and these are easily removed.The product has anti-corrosive properties. There is no troublesome foam formation when it is mixed.
Composition: combination of inorganic fillers and active substances
Appearence: greyish powder
Solubility:disperses in water,no deposits in short time.
Safety and Transport:
Release Agent PRP-75C is not classified as a dangerous good according to transport legislation, so we should transport it in term of undangerous good. It has not any hurt if you use it in right way.
Release Agent PRP-75C should be stored under cool and dry conditions. If these rules are obeyed, the product can be stored for at least one year. The production date is stated on the lot on the labels of each sack.
Product technical information and data is based on the best information available and does not constitute or imply awarranty or patent infringement of any kind. The user is responsible for testing product suitability prior to use the production.
If the rubber tyre anti-tack powder suited for all kinds of elastomers is the one you are looking for, welcome to buy the best products with our professional manufacturers and suppliers in China. We are equipped with a productive factory at your service. And our company will offer you good service and fast delivery.